Skip to content

Free tool

Power station runtime calculator

Pick a power station and a load to see how many hours it will last. Adjust for appliances that cycle, DC versus AC efficiency and a reserve you want to keep.

Estimated runtime

5.1 h

1,005 Wh × 85% efficiency − 10% reserve = 769 Wh usable, at an average 150 W.

See BLUETTI Elite 100 mini review

150 W load on every power station that can handle it

Power stationCapacityOutputRuntime
BLUETTI Elite 10 Mini128 Wh200 W39 min
Jackery Explorer 240 v2256 Wh300 W1.3 h
BLUETTI Elite 30 mini288 Wh300 W1.5 h
BLUETTI Elite 30 V2288 Wh600 W1.5 h
BLUETTI AC50B448 Wh700 W2.3 h
BLUETTI AC50P504 Wh700 W2.6 h
BLUETTI Handsfree 2512 Wh700 W2.6 h
BLUETTI EB70S716 Wh800 W3.7 h
BLUETTI AC70768 Wh1,000 W3.9 h
BLUETTI AC70P864 Wh1,000 W4.4 h
BLUETTI Pioneer Na900 Wh1,500 W4.6 h
BLUETTI Elite 100 mini1,005 Wh700 W5.1 h
Jackery HomePower 1000 v21,024 Wh1,500 W5.2 h
Jackery HomePower 1000 Plus v21,024 Wh1,800 W5.2 h
BLUETTI Elite 100 V21,024 Wh1,800 W5.2 h
BLUETTI Premium 100 V21,024 Wh1,800 W5.2 h
Jackery Explorer 1000 v21,070 Wh1,500 W5.5 h
BLUETTI AC1801,152 Wh1,800 W5.9 h
Jackery Explorer 1000 Plus1,264 Wh2,000 W6.4 h
BLUETTI AC180P1,440 Wh1,800 W7.3 h
Jackery Explorer 1500 v21,536 Wh2,000 W7.8 h
Jackery Explorer 1500 Ultra1,536 Wh1,800 W7.8 h
Jackery Explorer 2000 v22,042 Wh2,200 W10 h
Jackery HomePower 2000 Plus v22,048 Wh2,400 W10 h
BLUETTI AC200L2,048 Wh2,400 W10 h
BLUETTI AC200MAX2,048 Wh2,200 W10 h
BLUETTI Elite 200 V22,074 Wh2,600 W11 h
BLUETTI Premium 200 V22,074 Wh2,700 W11 h
BLUETTI AC200P L2,304 Wh2,400 W12 h
BLUETTI Apex 2002,560 Wh3,200 W13 h
BLUETTI Apex 3002,765 Wh3,840 W14 h
BLUETTI Elite 3003,014 Wh2,400 W15 h
Jackery HomePower 30003,072 Wh3,600 W16 h
Jackery HomePower 3600 Plus3,584 Wh3,600 W18 h
Jackery HomePower 3600 Pro Max3,584 Wh4,000 W18 h
BLUETTI Elite 4003,840 Wh2,600 W20 h
Jackery Explorer 5000 Plus5,040 Wh7,200 W26 h
BLUETTI EP500Pro5,120 Wh3,000 W26 h

How the runtime calculator works

Runtime (h) = capacity (Wh) × efficiency ÷ average load (W).

AC efficiency is about 85% because the inverter converts battery DC to 120 V AC. Running devices from 12 V or USB-C outputs avoids that loss (about 92%).

If a device cycles, like a fridge or heater thermostat, its average draw is running watts × time running. A 150 W fridge running 40% of the time averages 60 W.

Frequently asked questions

Why is my runtime shorter than the calculation?

+

Cold temperatures, inverter idle draw (10–30 W on large units), battery ageing and devices drawing more than their label are the usual reasons. Keeping a 10% reserve gives a more realistic estimate.

How long will a 1,000 Wh power station run a 100 W device?

+

About 8.5 hours on AC (1,000 × 0.85 ÷ 100), or 9 hours from DC outputs.

Does the eco mode affect runtime?

+

Eco or energy-saving modes switch the inverter off when no load is detected, which saves idle draw but can turn off very low-power devices. Disable it for CPAPs and routers.

More free tools