Skip to content

Free tool

Solar charging time calculator

Choose your station, panels and location to estimate how fast you'll recharge from the sun, how much energy you'll harvest per day and whether your array is too small or too big.
Conditions

Time to full in direct sun

7.4 h

≈ 1.4 days of typical sun in your region · about 707 Wh harvested per day

200 W array → 200 W accepted → ~136 W real output

You are using 57% of the station's solar input. 2 × 200 W panels would charge it 1.8× faster.

How the solar charging calculator works

Panel output is clipped to the station's maximum solar input, then reduced for real-world conditions: about 80% of rating in ideal sun, 65–70% laid flat, 20% in overcast weather.

Hours to full = Wh to fill ÷ real solar watts. Daily harvest uses the peak sun hours for your region (the number of hours equivalent to 1,000 W/m² of sunlight).

Always check that the combined open-circuit voltage of panels in series stays below the station's maximum PV voltage.

Frequently asked questions

How many solar panels do I need to charge a 2,000 Wh power station in a day?

+

With 5 peak sun hours and 75% efficiency, you need about 2,000 ÷ (5 × 0.75) ≈ 530 W of panels — for example 3 × 200 W panels, provided the station accepts that much solar input.

Can I charge a power station with solar on a cloudy day?

+

Yes, but slowly: expect 10–25% of the panel rating under thick cloud. Oversizing the array a little helps in weak light.

Can I use solar and AC charging at the same time?

+

Many larger Jackery and BLUETTI models support dual AC + solar charging for faster refills. Check the specs table on each product page.

More free tools